工控行業(yè)STM32單片機程序框架模板源碼下載

ID:378458 · 發(fā)表于 2018-7-24 14:20

IO按鍵掃描串口 E2PROM Flash AD DA LCD 觸摸屏 fatfs文件系統(tǒng) 外設操作一應俱全，基于時間片輪轉的狀態(tài)機框架

STM32單片機源程序如下:

/* Includes ------------------------------------------------------------------*/
#ifndef _ONPCSIMU_
#include "app.h"
#endif
#include "res.h"
#include "icon.h"
#include "ctrlcfg.h"
#include "ctrl.h"
#include "event.h"
#include "log.h"
#include "string.h"
#include "delay.h"
#include "gui.h"
#include "touch.h"
#include "can_protomod.h"
#include "buzzer.h"
#ifndef _ONPCSIMU_
#include "recipe.h"
#endif
_UINT16 g_mainflag = 0;
extern void idle_modbus(void);
extern void Error_Process (void);
extern _BYTE SetAlarm( _UINT16 id, _UINT16 reference, _UINT16 uls, _UINT16 lls , _UINT16 strid, _UINT16 mode);
extern void welcomTimerout(void);
extern void Comm_Timerout_Check (void);
_UINT32 ad_timer=0 ;
_BYTE tim_100ms =0,time_500ms=0;
extern _UINT16 g_appSta;
int main(void)
{
if( g_mainflag == 0 )
{
// for test
App_Init ();
Var_Init ();
LCM_SPI_Flash_Init ();
gClearScreen (WHITE);
Display_ON();
BackLight (90);
g_mainflag = 1;
}
#ifndef _ONPCSIMU_
while (1)
#endif
{
#ifndef _ONPCSIMU_
if((get_milliseconds()-ad_timer)>=(_UINT32)10)
{
ad_timer = get_milliseconds();
// Get_AD1 ();
Touch_Panel_Getxy ();
switch (tim_100ms)
{
case 0:
break;
case 1:
BeepTimerCb();
break;
case 2:
break;
case 3:
break;
case 4:
break;
case 5:
Backlight_Powersave ();
break;
case 6:
break;
case 7:
Comm_Timerout_Check ();
break;
case 8:
break;
case 9:
time_500ms++ ;
if (time_500ms >= 5)
{
time_500ms = 0;
Error_Process ();
}
break;
}
tim_100ms ++;
if (tim_100ms >= 10)
tim_100ms = 0;
}
#else
if((get_milliseconds()-ad_timer)>=(_UINT32)10)
{
ad_timer = get_milliseconds();
{
switch (tim_100ms)
{
case 9:
time_500ms++ ;
if (time_500ms >= 5)
{
time_500ms = 0;
}
break;
default:
break;
}
tim_100ms ++;
if (tim_100ms >= 10)
tim_100ms = 0;
}
}
#endif
}
}
#ifdef _ONPCSIMU_
void idleProcess( void )
{
main();
}
#endif