剛開始用ulink發現驅動始終安裝不上，網上搜索n久未果，罷也！后面選擇jlink發現問題多多，但是出現以下數據仿佛看到希望，畢竟可以讀到內核的數據 ARM7TDMI-S Core 電壓 3.332V
SEGGER J-Link Commander V4.34 ('?' for help)
Compiled Aug 26 2011 18:24:47
DLL version V4.34, compiled Aug 26 2011 18:24:32
Firmware: J-Link ARM V8 compiled Jan 31 2018 18:34:52
Hardware: V8.00
S/N: 20080643
Feature(s): RDI,FlashDL,FlashBP,JFlash,GDBFull
VTarget = 3.332V
Info: TotalIRLen = 4, IRPrint = 0x01
Found 1 JTAG device, Total IRLen = 4:
#0 Id: 0x4F1F0F0F, IRLen: 04, IRPrint: 0x1, ARM7TDMI-S Core
Found ARM with core Id 0x4F1F0F0F (ARM7)
ETM V1.2: 1 pairs addr.comp, 0 data comp, 4 MM decs, 1 counters
JTAG speed: 100 kHz
J-Link>
繼續探索： 
check blank verify 等檢查會都會出現問題，成功次數只是偶爾！于是想可能jlink是驅動不穩定問題！又開始網上搜索進入各大論壇網站，終于找到了jlink4,34版本驅動！發現問題依然不穩定.....以當年的脾氣早就火了！但還會慢慢摸索終于找到問題，默認仿真速率是1000k，改為50k的時候不穩定點現象明顯好轉！后面改為20k基本百發百中.....
