亚洲春色中文字幕久久久-三上亚,一吻二脱三床四吻胸,国产真实伦对白视频全集,在线毛片观看,精品成品入口黄网,国产毛aⅴ片久久久,亚洲AV色香蕉一区二区三区老师,萧皇后A级艳片,色情日本视频更新,99久久亚洲精品日本无码

標題: 基于51單片機的簡易數字鐘 [打印本頁]

作者: zyl淋雨一直走 時間: 2021-10-27 16:29
標題: 基于51單片機的簡易數字鐘
[attach]283378[/attach]

#include<at89x52.h>
#define uchar unsigned char
#define uint unsigned int
sbit RS=P2^0;
sbit RW=P2^1;
sbit E=P2^2;
sbit S1=P3^2;
sbit S2=P3^3;
sbit S3=P3^4;
uchar data hour=23,minute=59,second=50;
uchar count=0;
bit flag1s=0;
unsigned char v_time[9];
unsigned char disp[]="2021-09-07";
unsigned char v_key=0;

//函數聲明
void LCD_init();
void Set_xy(unsigned char line,unsigned char col);
void Write_dat(unsigned char data_d);
void delay_nms(unsigned char t);
void Write_com(unsigned char com_d);
void Display(unsigned char line,unsigned char col,unsigned char *dlcd);

/*------------LCD初始化函數-------------*/
void LCD_init()
{
delay_nms(15);
Write_com(0x38);
delay_nms(5);
Write_com(0x0c);
delay_nms(5);
Write_com(0x06);
}

/*------------LCD寫命令函數-------------*/
void Write_com(unsigned char com_d)
{
RS=0;
RW=0;
E=1;
P0=com_d;
E=0;
}
/*------------LCD設置顯示位置函數-------------*/
void Set_xy(unsigned char line,unsigned char col)
{
unsigned char address;
if(line==0)
address=0x80+col;
else
address=0xc0+col;
delay_nms(5);
Write_com(address);
}
/*------------LCD寫數據函數------------*/
void Write_dat(unsigned char data_d)
{
RS=1;
RW=0;
E=1;
P0=data_d;
E=0;
}

/*------------LCD固定字符串顯示函數------------*/
void Display(unsigned char line,unsigned char col,unsigned char *dlcd)
{
Set_xy(line,col);
while(*dlcd)
{
delay_nms(5);
Write_dat(*dlcd);
dlcd++;
}
}

void delay_nms(unsigned char t)
{
unsigned int i, j;
for (i = t; i > 0; i--)
for (j = 110; j > 0; j--);
}
/*--------T0初始化函數---------*/
void T0_Init()
{
EA=1;
ET0=1;
TMOD=0x01;
TH0=0x3c;
TL0=0xb0;
TR0=1;
}
/*-------時鐘函數--------*/
void timer_init()
{
if(flag1s)
{
flag1s=0;
if(++second==60)
{
second=0;
if(++minute==60)
{
minute=0;
if(++hour==24)
hour=0;
}
}
}
}
/*--------拆分處理函數---------*/
void convert()
{
v_time[0]=hour/10+0x30;
v_time[1]=hour%10+0x30;
v_time[2]=':';
v_time[3]=minute/10+0x30;
v_time[4]=minute%10+0x30;
v_time[5]=':';
v_time[6]=second/10+0x30;
v_time[7]=second%10+0x30;
v_time[8]=0;
}
/*---------按鍵掃描函數----------*/
void key_scan()
{
if(S1==0)
{
delay_nms(10);
if(S1==0)
{
v_key++; TR0=0;
if(v_key>=3)
{
v_key=0;
TR0=1;
}
while(S1==0);//按鍵S1按下處理函數
}
}
}
/*----------調分函數------------*/
void adjust_minute()
{
if(S2==0)
{
delay_nms(10);
if(S2==0)
{
minute++;
if(minute==60) minute=0;
while(S2==0);
}
}
if(S3==0)
{
delay_nms(10);
if(S3==0)
{
minute--;
if(minute==255) minute=59;
}
}

}
/*----------調時函數------------*/
void adjust_hour()
{
if(S2==0)
{
delay_nms(10);
if(S2==0)
{
hour++;
if(hour==24) hour=0;
while(S2==0);
}
}
if(S3==0)
{
delay_nms(10);
if(S3==0)
{
hour--;
if(hour==255) hour=23;
}
}

}
//主函數
main()
{
T0_Init();
LCD_init();
EA=1;
while(1)
{
key_scan();
switch(v_key)
{
case 0:timer_init();break;
case 1:adjust_minute();break;
case 2:adjust_hour();
}

convert();
Display(1,3,v_time);
Display(0,3,disp);
}
}
/*--------T0中斷服務函數---------*/
void T0_ser() interrupt 1
{
TH0=0X3c;
TL0=0xb0;
if(++count==20)
{
flag1s=1;
count=0;
}
}
[attach]283380[/attach]

2.jpg (57.5 KB, 下載次數: 90)

1.jpg (55.61 KB, 下載次數: 88)

作者: 452345453 時間: 2021-12-29 09:37
請問一下如果要把按鍵3改成在調節功能下切換位置怎么改？

作者: 52255 時間: 2022-12-18 14:42
你好那個功能鍵我把他們換到P1口了改完后按下去沒反應 是怎么回事？

作者: 52255 時間: 2022-12-18 14:57
你好那個減的按鍵為什么一次減兩下需要怎么改

歡迎光臨 (http://www.denmoz.com/bbs/)