男人J桶进男人屁股过程,久久精品中文字幕一区二区三区,年轻护士漂亮3

<acronym id="4wc2o"></acronym>

#include <reg51.h>
sbit key1 = P1^0;
sbit beep = P1^0;
bit flag1s = 0;
bit KeySta = 1;
unsigned char hour = 12;
unsigned char minute =59;
unsigned char second =50;
unsigned char mode = 0;
void FreshTime();
void TimeInit();
void IntInit();
void InitLedBuff();
void keyscan();
void zhengdian();
unsigned char code LedChar[] = {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,
0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71,0x40,0x00};//共陰數碼管顯示字符轉換表
unsigned char LedBuff[6] = {0xff,0xff,0xff,0xff,0xff,0xff};//數碼管顯示緩沖區
void main()
{
TimeInit();
IntInit();
InitLedBuff();
while(1)//顯示內容處理
{
if(flag1s&&!mode) //時間顯示模式
{
flag1s = 0;
FreshTime();
}
else if(mode == 1) //校準分鐘
{
LedBuff[0] = 17;
LedBuff[1] = 17;
LedBuff[4] = 17;
LedBuff[5] = 17;//不顯示
LedBuff[2] = minute/10;
LedBuff[3] = minute%10;
}
else if(mode == 2) //校準小時
{
LedBuff[2] = 17;
LedBuff[3] = 17;
LedBuff[4] = 17;
LedBuff[5] = 17;//不顯示
LedBuff[0] = hour/10;
LedBuff[1] = hour%10;
}
else if(mode == 3) //校準完成重新顯示
{
InitLedBuff();
mode = 0;
}
keyscan();
}
}
void InitLedBuff()//初始化時間到顯示緩沖區
{
LedBuff[0] = hour/10;
LedBuff[1] = hour%10;
LedBuff[2] = minute/10;
LedBuff[3] = minute%10;
LedBuff[4] = second/10;
LedBuff[5] = second%10;
}
void FreshTime()//刷新時間到顯示緩沖區
{
second++;
if(second == 60)//進位
{
second = 0;
minute++;
LedBuff[2] = minute/10;
LedBuff[3] = minute%10;
if(minute ==60)//進位
minute = 00;
hour++;
if(hour == 24)
hour = 0;
LedBuff[0] = hour/10;
LedBuff[1] = hour%10;
}
LedBuff[4] = second/10;
LedBuff[5] = second%10;
}
void TimeInit()//定時器初始化
{
TMOD = 0X11; //設置定時器為模式1
TL0 = 0xB0;
TH0 = 0x3C; //定時初值 50ms
TL1 = 0x18; //
TH1 = 0xFC; //定時初值 1ms
TR0 = 1; //定時器0開始計時
TR1 = 1; //定時器1開始計時
ET1 = 1; //使能定時器1
ET0 = 1; //使能定時器0
PT0 = 1; //提高計時準確性，提高定時器0中斷優先級
EA = 1; //打開總中斷
}
void IntInit()//外部中斷初始化
{
IT0 = 1; //下降沿觸發
EX0 = 1; //使能外部中斷0
}
void keyscan() //按鍵掃描及處理
{
static bit backup = 1;
if (KeySta != backup) //當前值與前次值不相等說明此時按鍵有動作
{
if (backup == 0) //如果前次值為0，則說明當前是彈起動作
{
if(mode == 1)
{
minute++;
if(minute==60)
minute = 0;
}
else if(mode == 2)
{
hour++;
if(hour==24)
hour = 0;
}
}
backup = KeySta; //更新備份為當前值，以備進行下次比較
}
}
void Int0() interrupt 0
{
mode++;
if(mode == 4)
{
mode = 0;
}
}
void Ledfresh() //數碼管顯示刷新
{
static unsigned char i = 0;
switch(i)
{
case 0 : P2 = ~(0x01<<i);P0 = LedChar[LedBuff[i]];i++;break;
case 1 : P2 = ~(0x01<<i);P0 = LedChar[LedBuff[i]];i++;break;
case 2 : P2 = ~(0x01<<i);P0 = LedChar[LedBuff[i]];i++;break;
case 3 : P2 = ~(0x01<<i);P0 = LedChar[LedBuff[i]];i++;break;
case 4 : P2 = ~(0x01<<i);P0 = LedChar[LedBuff[i]];i++;break;
case 5 : P2 = ~(0x01<<i);P0 = LedChar[LedBuff[i]];i=0;break;
}
}
void Time0() interrupt 1 //12MHz 50ms
{
static unsigned char n = 0;
TL0 = 0xB0;
TH0 = 0x3C;
n++;
if(n==20)
{
n=0;
flag1s = 1;//1s標志位
}
}
void zhengdian() //整點報時
{
if((second==0)&&((minute==0)&&(hour>=0)))
{
beep=1;
beep=0;
}
}
void Time1() interrupt 3 //12MHz 1ms
{
static unsigned char keybuff = 0xff;
TL1 = 0x18;
TH1 = 0xFC;
Ledfresh();
keybuff = (keybuff<<1)|key1;
if (keybuff == 0x00)
{
KeySta = 0;
}
else if (keybuff == 0xFF)
{
KeySta = 1;
}
else
{}
}

復制代碼

<option id="ocg4k"></option>

<pre id="ocg4k"></pre>