诱受H巨肉高潮失禁男男,国产人妻人伦精品九色威尼斯商人,国产精品伦理精品

#include <reg51.h>
#include <intrins.h>

sbit rs= P2^0;
sbit rw = P2^1;
sbit ep = P2^2;
sbit p10=0x90;
sbit p11=0x91;
sbit p12=0x92;
sbit p13=0x93;
sbit p24=0xA4;

unsigned char code dis1[12][9] = {"1","air","rice","tree","sea","hair","meat","he","she","good","nice"};
unsigned char code dis2[] = {"rate"};
unsigned char code dis3[11][9]={"0%","10%","20%","30%","40%","50%","60%","70%","80%","90%","100%"};
unsigned int  bzw[13]={2,2,2,2,2,2,2,2,2,2,2,2,2};
void delay(unsigned char ms)
{
unsigned char i;
while(ms--)
{
for(i = 0; i< 250; i++)
{
_nop_();
_nop_();
_nop_();
_nop_();
}
}
}

bit lcd_bz()
{
bit result;
rs = 0;
rw = 1;
ep = 1;
_nop_();
_nop_();
_nop_();
_nop_();
result =(bit)(P0 & 0x80);
ep = 0;
return result;
}

void lcd_wcmd(unsigned char cmd) //寫指令
{
while(lcd_bz());//判斷LCD是否忙碌
rs = 0;
rw = 0;                //re=0，rw=1       ；e為正脈沖
ep = 0;
_nop_();
_nop_();
P0 = cmd;
_nop_();
_nop_();
_nop_();
_nop_();
ep = 1;
_nop_();
_nop_();
_nop_();
_nop_();
ep = 0;
}

void lcd_pos(unsigned char pos)       //顯示位置轉換程序
{
lcd_wcmd(pos | 0x80);  //顯示第一行的地址是0x08，第二行的是0xc0。
}

void lcd_wdat(unsigned char dat) //寫數據
{
while(lcd_bz());//判斷LCD是否忙碌
rs = 1;
rw = 0;
ep = 0;
P0 = dat;
_nop_();
_nop_();
_nop_();
_nop_();
ep = 1;
_nop_();
_nop_();
_nop_();
_nop_();
ep = 0;
}

void lcd_init()       //初始化lcd
{
lcd_wcmd(0x38);
delay(1);
lcd_wcmd(0x0c);
delay(1);
lcd_wcmd(0x06);
delay(1);
lcd_wcmd(0x01);       //清屏
delay(1);
}

void main(void)
{
unsigned char i;
unsigned char k;
unsigned char count;
unsigned char a;
unsigned char j;
lcd_init();// 初始化LCD
delay(10);j=0;
i=1;
while(1){
delay(60);
lcd_wcmd(0x01);//清屏指令，防止單詞由長到短時出現亂碼.
delay(1);
P1=0x00;       j=0;
lcd_pos(0x01);//設置顯示位置

      if(P1!=0)
      {
            switch(P1)             //P1 掃行
                     {
                     case (0x01):
                     if(bzw[ i]==2)
                     { count++;
                     bzw[ i]=bzw[ i]-1; //標志位，每個單詞只能使count加1.
                     if(bzw[ i]<2)
                     bzw[ i]=1;
                     } i++ ;
                     break;//sure
                     case (0x02):i++;j++;
                     bzw[ i]=2;break;                                  //unknown
                  case (0x04):i--;break;                                  //up
                     case (0x08):i++;break;                                  //down

                     }       }
p24=0;
if(j==1)
p24=1;
if(i==11) i=1;
if(i==0) i=10;
while(dis1[ i][k]!= '\0')
{
lcd_wdat(dis1[ i][k]);//單詞
k++;
}k=0;
lcd_pos(0x42);// 設置顯示位置
a = 0;
while(dis2[a] != '\0')
{
lcd_wdat(dis2[a]);// rate
a++;
}
if(count>10) count=10;
lcd_pos(0x48);
while(dis3[count][k]!= '\0')
{
lcd_wdat(dis3[count][k]);//正確率
k++;
}k=0;
}
}

附1
/*--------------------------------------------------------------------------
REG51.H

Header file for generic 80C51 and 80C31 microcontroller.
Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.
All rights reserved.
--------------------------------------------------------------------------*/

#ifndef __REG51_H__
#define __REG51_H__

/*  BYTE Register  */
sfr P0 = 0x80;
sfr P1 = 0x90;
sfr P2 = 0xA0;
sfr P3 = 0xB0;
sfr PSW  = 0xD0;
sfr ACC  = 0xE0;
sfr B = 0xF0;
sfr SP = 0x81;
sfr DPL  = 0x82;
sfr DPH  = 0x83;
sfr PCON = 0x87;
sfr TCON = 0x88;
sfr TMOD = 0x89;
sfr TL0  = 0x8A;
sfr TL1  = 0x8B;
sfr TH0  = 0x8C;
sfr TH1  = 0x8D;
sfr IE = 0xA8;
sfr IP = 0xB8;
sfr SCON = 0x98;
sfr SBUF = 0x99;

/*  BIT Register  */
/*  PSW */
sbit CY = 0xD7;
sbit AC = 0xD6;
sbit F0 = 0xD5;
sbit RS1  = 0xD4;
sbit RS0  = 0xD3;
sbit OV = 0xD2;
sbit P = 0xD0;

/*  TCON  */
sbit TF1  = 0x8F;
sbit TR1  = 0x8E;
sbit TF0  = 0x8D;
sbit TR0  = 0x8C;
sbit IE1  = 0x8B;
sbit IT1  = 0x8A;
sbit IE0  = 0x89;
sbit IT0  = 0x88;

/*  IE */
sbit EA = 0xAF;
sbit ES = 0xAC;
sbit ET1  = 0xAB;
sbit EX1  = 0xAA;
sbit ET0  = 0xA9;
sbit EX0  = 0xA8;

/*  IP */
sbit PS = 0xBC;
sbit PT1  = 0xBB;
sbit PX1  = 0xBA;
sbit PT0  = 0xB9;
sbit PX0  = 0xB8;

/*  P3  */
sbit RD = 0xB7;
sbit WR = 0xB6;
sbit T1 = 0xB5;
sbit T0 = 0xB4;
sbit INT1 = 0xB3;
sbit INT0 = 0xB2;
sbit TXD  = 0xB1;
sbit RXD  = 0xB0;

/*  SCON  */
sbit SM0  = 0x9F;
sbit SM1  = 0x9E;
sbit SM2  = 0x9D;
sbit REN  = 0x9C;
sbit TB8  = 0x9B;
sbit RB8  = 0x9A;
sbit TI = 0x99;
sbit RI = 0x98;

#endif

附2
/*--------------------------------------------------------------------------
INTRINS.H

Intrinsic functions for C51.
Copyright (c) 1988-2004 Keil Elektronik GmbH and Keil Software, Inc.
All rights reserved.
--------------------------------------------------------------------------*/

#ifndef __INTRINS_H__
#define __INTRINS_H__

extern void       _nop_    (void);
extern bit          _testbit_ (bit);
extern unsigned char _cror_ (unsigned char, unsigned char);
extern unsigned int  _iror_ (unsigned int,  unsigned char);
extern unsigned long _lror_ (unsigned long, unsigned char);
extern unsigned char _crol_ (unsigned char, unsigned char);
extern unsigned int  _irol_ (unsigned int,  unsigned char);
extern unsigned long _lrol_ (unsigned long, unsigned char);
extern unsigned char _chkfloat_(float);
extern void       _push_ (unsigned char _sfr);
extern void       _pop_    (unsigned char _sfr);

#endif